Filter
Top Products
Auto Zooming Tracking Dome Camera User Manual
52
3.7 Dome Label
From the menu shown in Fig3.1, move the cursor to
<DOME LABEL>, press Open to enter the following menu
(Figure .32)
Figure 3.32 DOME LABLE
<EDIT DOME LABEL>: To edit the dome description and
information. Please refer to 3.5.4 Edit Preset Label”.
<CLEAR DOME LABLE>: Clear current dome label. Press
Open to enter the menu and then operate with instructions.
3.8 Other Functions
RESET CAMERA:
If the camera does not operate or if you close camera‟s
control, cycle camera power. Cycling camera power resets the
camera but does not change any saved camera settings.
REBOOT SYSTEM:
Reboot the system if it does not operate or if there is no
control. Rebooting the system will cycle dome and camera power
without changing programmed dome settings. Ω
DOME LABLE
<EDIT DOME LABEL>
<CLEAR DOME LABEL>
BACK
EXIT