Filter
Top Products
5
V) Camera Mounting Description
The ATC-1000 can be mounted in a variety of
different ways using the straps and Velcro patch
provided. Please follow the suggested methods of
mounting as follows:
To mount ATC-1000 using the handlebar strap:
1. Place the handlebar grip on the handlebar.
2. Place the dual-locking grip on the handlebar grip.
3. Slide the strap through the base of the
dual-locking grip and fasten around the
handlebar grip.
4. Slide the ATC-1000 into the dual-locking grip.
You can adjust the angle of the camera by 10°
at a time.
To mount ATC-1000 using Velcro straps:
1. Attach the rubberized patch to the underside of
the dual-locking grip.
2. Place the dual-locking grip on the helmet, and
thread the Velcro strap through its base.
3. Secure the Velcro strap by fastening it through
the helmet vents.
4. Slide the ATC-1000 into the dual-locking grip.
You can adjust the angle of the camera by 10°
at a time.
6
HC18_manual_1_sep 9/2/05 16:50 Page 5