Filter
Top Products
- 78 -
Connecting with a HDMI cable
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i] or [480p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ The image quality of [AUTO] differs from that of [1080p], [1080i] and [480p].
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
Listening in 5.1 channel sound
The audio recorded with the built-in microphone can be played back as 5.1 ch audio by connecting
this unit with a 5.1 ch compatible amplifier or TV using a HDMI cable.
For connecting this unit with an AV amplifier or a TV, refer to operating instructions of the AV
amplifier or the TV.
≥ The audio recorded with [MIC SETUP] set to [2ch] will be in stereo (2 ch).
Connecting with the AV multi cable
AV multi connector output setting can be changed.
Changing the component output setting
: [OTHER FUNCTION] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
: [OTHER FUNCTION] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [OTHER FUNCTION] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
MENU
MENU
MENU
AG-AC90-VQT4M99_mst.book 78 ページ ２０１２年９月２５日 火曜日 午後１２時６分