- 84 -
Refer to page 24 for how to set up the Menu.
Camera Setup
≥ Switch to manual mode. (l 33)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1 Touch [CUSTOMIZE SCENE].
2 Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3 (To change the setting of the scene file)
Change the setting of the camera setting menu.
≥ Following settings for camera setting menu can be stored. (l 85 to 88)
j[DETAIL LEVEL]
j[V DETAIL LEVEL]
j[DETAIL CORING]
j[CHROMA LEVEL]
j[CHROMA PHASE]
j[COLOR TEMPA ch]
j[COLOR TEMP B ch]
j[MASTER PED]
j[AUTO IRIS LEVEL]
j[DRS]
j[GAMMA]
j[KNEE]
j[MATRIX]
j[SKIN TONE DTL]
≥ Changed settings of the camera setting menu are saved in the scene file.
Default setting of the scene file
Menu
Using the Menu
: [CAMERA SETUP] # desired setting
[CUSTOMIZE SCENE]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6]
MENU
[SCENE1] Setting appropriate for standard recording
[SCENE2] Setting appropriate for recording considering the characteristic of fluorescent
lamps (indoors, etc.)
[SCENE3] Setting appropriate for recording with modulation in resolution, color shade, and
contrast
[SCENE4] Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5] Setting appropriate for recording as a cinema with high contrast
[SCENE6] Setting appropriate for recording as a cinema with high dynamic range
AG-AC90-VQT4M99_mst.book 84 ページ ２０１２年９月２５日 火曜日 午後１２時６分
