Filter
Top Products
- 96 -
Selects the brightness level of the right-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2 Touch / to adjust settings.
3 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 62)
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed by pressing ZEBRA button when set to [ON]. (l 62)
You can check if the image is level while recording motion pictures and still pictures. The function
can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥ When Focus Assist is set to on, the following occurs. (l 39)
jThe guidelines are not displayed. (these are displayed on the TV when this unit is connected to
TV.)
jThe setting cannot be changed.
Display of the range that can be displayed with the common household TV (safety zone) can be
switched.
≥ The safety zone is not displayed on the images that is actually recorded.
Selects the operation of the Recording Counter during recording. (l 54)
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
[GUIDE LINES]
[OFF]/ / /
[SAFETY ZONE]
[90%]/[OFF]
[REC COUNTER]
[TOTAL]/[SCENE]
AG-AC90-VQT4M99_mst.book 96 ページ ２０１２年９月２５日 火曜日 午後１２時６分