Filter
Top Products
- 90 -
You can set the auto switch recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
∫ Auto switch recording
This is simple relay recording. It is possible to continuously record on the SD card in the other card
slot even when the available capacity of the SD card runs out during the recording. Note that there
will be a momentary pause in the sound when recording media is switched.
≥ is displayed on the media to record the video. will disappear when the recording media is
switched and the auto switch recording is started.
≥ The number of recording media switches in auto switch recording is limited to one.
∫ Backup recording
Same motion picture can be recorded on two SD cards.
≥ is displayed on the cards the motion pictures is recorded.
≥ When [SD CARD 1] is selected as the destination of recording the motion pictures, backup will be
recorded on [SD CARD 2].
≥ It is recommended to record on the SD cards that are same speed class and same capacity when
performing the backup recording.
(Auto switch recording)
≥ Destination to record still pictures will be switched to other SD card after performing the auto
switch recording.
(Backup recording)
≥ Backup recording will not be performed for still pictures.
≥ When performing backup recording, even in the case where an error has occurred in one of the
SD cards and recording has stopped, recording can be continued using the other SD card.
≥ When there is no more remaining recordable time, backup recording stops. When one of the SD
cards has capacity remaining, the recording destination of video and photos changes to the SD
card with capacity remaining.
[2 SLOTS FUNC.]
[OFF]: Cancel the setting.
[AUTO SW]: Set the auto switch recording
[BACKUP]: Set the backup recording
AG-AC90-VQT4M99_mst.book 90 ページ ２０１２年９月２５日 火曜日 午後１２時６分