Filter
Top Products
12 (E)
Checking the system operations (cont.)
1 Open the LCD monitor while holding down the
panel locking button.
The LCD monitor can be opened to a maximum
angle of 90°.
Forcing it past this point will damage the cam-
era-recorder.
2 In the shooting pause mode, press the t button.
The last two or three seconds of the scenes you
have shot are now played back.
After playback, the shooting pause mode is
restored.
1 Slide the OPEN/EJECT lever in the direction shown
by the arrow to open the cassette cover.
When the cover is fully opened, the cassette holder
pops out automatically.
2 Take out the cassette tape.
3 Press the part marked “PUSH” and close the cas-
sette holder.
4 Close the cassette cover after the cassette holder
has been completely retracted.
Checking what you have shot
(rec check)
You can conduct an image search (P31) by holding
down the t button in the shooting pause mode.
Do not hold down the t button when conducting a
rec check.
Tape protection mode
If you leave the camera-recorder in the shooting
pause mode for 5 minutes or so, the camera-recorder
will automatically switch to the tape protection mode
and its power will turn off.
However, when “STBY” has been selected as the
TAPE PROTECT item setting on the OTHER FUNC
-
TIONS screen using the menus (P62-64), the cylin-
der head will stop instead of the power being turned
off. (
P73)
VM
CH1
CH2
AUDIO LEVEL
REC
MODE CHKSNS
OISZEBRA
RESETCOUNTER
ZOOM SPEED
OFF/M
H
L
AUDIO IN
FRONT
REAR
CH1 CH2
MIC
MIC
LINE
RESET
FOCUS USER 2
SEARCH
MANUAL
MENU
VOL/JOG
SEARCHD.ZOOM
USER 3
STILL
WHITE BAL
AUTO
PUSH
SHUTTER/IRIS
Removing the tape
OPEN/EJECT
mrpe
mrpe
`ilpb
AG-DVC60E_En.fm 12 ページ ２００４年９月２日 木曜日 午後１時４３分