Filter
Top Products
48 (E)
Setting menus
The underlining indicates the factory setting.
OTHER FUNCTIONS screen
Item/
(display mode)
Description of settings
REMOTE
(Camera)
(VCR)
For setting the operations which are
performed using the accessory wireless
remote control unit. (See page 19 for the
remote control unit settings.)
VCR1:
The operation performed by the
remote control unit which has been set
to be used for VCR1 are accepted.
VCR2:
The operation performed by the
remote control unit which has been set
to be used for VCR2 are accepted.
OFF:
Operations performed by the remote
control unit are not accepted.
DV CONTROL
(Camera)
For setting the control method when
backup shooting is to be performed by
connecting a component for backup
purposes to the DV connector.
OFF:
The component for backup purposes
is not controlled.
EXT:
The component for backup purposes
is controlled using the START/STOP
button on the camera recorder. The
images shot by the camera recorder are
recorded by the component for backup
purposes.
However, the camera recorder does not
record the images.
BOTH:
The images shot by the camera
recorder are recorded by both camera
recorder and the component for backup
purposes.
CHAIN:
When the tape in the camera
recorder approaches the end during
shooting, recording is automatically
commenced by the component for
backup purposes, which has been set to
the recording standby mode.
DV CMD SEL
(Camera)
For setting the recording operation to be
performed by the component for backup
purposes when the START/STOP button
on the camera recorder has been pressed.
REC_P:
The mode is switched between recording
and recording pause.
STOP:
The mode is switched between recording
and stop.
<Note>
Select STOP as the item’s setting if the
component for backup purposes is not
equipped with a recording pause function.
REC LAMP
(Camera)
For setting the lighting of the tally lamps.
OFF:
The tally lamps do not light.
FRONT:
The front tally lamp (by the
microphone) lights.
REAR:
The rear tally lamp (by the
viewfinder) lights.
BOTH:
Both the front and rear tally lamps
light.
DISPLAY SETUP screen
Item/
(display mode)
Description of settings
SELF SHOOT
(Camera)
For selecting the LCD monitor’s mirror
function for face-to-face shooting. When
MIRROR is set, the image on the LCD
monitor is reversed at the left and right for
display during face-to-face shooting.
NORMAL MIRROR
EVF MODE
(Camera)
(VCR)
For selecting what is to be displayed in the
viewfinder and on the LCD monitor.
ON:
Images are shown at all times in the
viewfinder.
AUTO:
When the LCD monitor is opened, the
images no longer appear in the
viewfinder.
EVF COLOUR
(Camera)
For selecting colour or monochrome for the
viewfinder display.
ON:
Colour display
OFF
Monochrome display