Filter
Top Products
50 (E)
Screen displays
Camera mode and VCR mode
1Counter display
Each time the COUNTER button is pressed,
the data is selected in the sequence given
below.
COUNTER:
Counter value
M COUNTER:
Counter value in the memory stop mode
TC:
Time code value
“TC2” is displayed when the time code
value could not be read out properly from
the tape.
UB:
User’s bit value
“UB
2” is displayed when the user’s bit
value could not be read out properly from
the tape.
FR:
Information on the frame rate used when
shooting
FR 50I : Standard (50i interlace) mode
(50 fields per sec.)
FR 25P : 25P progressive mode
(25 frames per sec.)
2AWB/ABB operation status display
The operation statuses of the auto white
balance and auto black balance are displayed
here.
3AWB error display
LOW LIGHT:
This appears when the luminance is too
low during the auto white balance
adjustment.
4Recording time mode display (SP or LP)
5Squeeze recording display
This appears when SQUEEZE has been
selected (see page 41) as the ASPECT
CONV item setting on the setting menu
CAMERA SETUP screen and squeeze
recording is being performed or when
squeeze recorded images are being played
back.
6Setting selection display
The selected setting appears here when a
switch has been selected or a button has
been pressed to select a setting.
7Auto iris control status display
STD : Standard auto iris control
SPOT : Auto iris control for spotlight
BACK : Auto iris control for backlight
compensation
A I–PAUSE USER-1
DV
ALC
O
TC 12:34:56:00 Z78
SP
25P MF25
SQU
2222 2
2
2222222
MACRO
22 2
2
2222
P 3.2K
222222 22 2222222
F5.6
18
dB
SPOT LOW LIGHT
ND
1/
64
1/
123.4
ND
1/
64
03
INDEX
AUG 31 20 23: 59:59
48K
22
min
CH1
CH2
4
7
6
3
2
1
5
2
Marker
Marker
Detect area