Filter
Top Products
27
Preparation
Adjusting the grip belt
Adjust the grip belt to suit your hand, and hold it
correctly.
1
Open the belt cover and loosen the belt.
2
Work your hand through the grip belt and
fasten the belt.
Slip your hand through the belt as far as
it goes.
Tighten up the belt so that your hand
remains firmly in place.
•
•
When loosening the belt, please take care so
that the belt does not come away from the grip
belt stopper.
Grip belt stopper
•
Attaching the shoulder strap
Attach the shoulder strap and use it as a precaution against dropping the camera.
1
Thread the belt through the shoulder belt
installation hole.
Shoulder belt
installation hole.
Thread the belt through the fastener
after threading through the shoulder belt
installation hole. At least 2 cm of the belt
must extend from the fastener.
•
2
Install the belt on the other shoulder belt
installation hole.