Filter
Top Products
41
Basic Operations
Using the Function Menu
The Function Menu is an expanded function of the
setting menu that allows you to configure WHITE
BALANCE, SYNCRO SCAN, SELF TIMER,
I.EXPOSURE, and SKIN TONE DTL settings.
1
Press the FUNC/EXEC button while in
CAMERA or PHOTO mode.
The items that appear may vary depending on
the mode and settings.
2
Select the left or right button of the cursor
button, and press ENTER.
3
To change numerical values, press the up or
down button of the cursor button to select
the values, and then press ENTER.
You can set the following items in the Function
Menu.
Icon Item Display mode Page
Ach
,
Bch
WHITE
BALANCE
It is not
displayed
when in AUTO
mode.
Pages
7, 56 of
Vol.2
SYNC
SYNCRO
SCAN
It is not
displayed
when in AUTO
mode.
Pages
17, 67 of
Vol.2
SELF TIMER PHOTO Page 105
of Vol.2
I.EXPOSURE It is not
displayed
when in AUTO
mode.
Page 102
of Vol.2
SKIN TONE
DTL
It is not
displayed
when in AUTO
mode.
Page 102
of Vol.2
4
Press the ENTER button when the item has
been set.
5
Press the FUNC/EXEC button to close the
Function Menu.
Operation in the thumbnail display screen
(AVCHD mode only)
Each press of the FUNC/EXEC button moves the
cursor in the thumbnail display screen of PB mode.
Operating menu Thumbnail
Cursor moves.
Initializing the menu settings
You can return the setting values for each item
to their factory default settings with the MENU
INIT item in the setting menu OTHER FUNCTION
screen.
To initialize menu settings, set this item to YES,
and then press the ENTER button.
Setting values for the following items are not
initialized.
Time code values
User information values
CLOCK SET and TIME ZONE
OPERATION TIME
•
•
•
•
■