Filter
Top Products
–53–
Status Displays Inside the Viewfinder Screen
8
Audio level display
This displays the audio CH1 level.
During sine wave input, the audio level display corresponds roughly to the VTR level
meter display as follows.
Audio Channel 1 Level Display
VTR Level Meter
9 Iris value display
This displays the approximate iris setting (F number).
10 Warning display
This displays the black balance, white balance, auto knee function, super iris, super high
gain and other warning displays.
11 Safety zone marker
This indicates the 80% or 90% (setting when shipped from the factory) range for the view-
finder screen area. The screen area percentage is selected at the MARKER page of the
setting menu.
ÁSee “Setting the Marker Displays” (page 56) for a detailed description.
12 Center marker
This indicates the center of the viewfinder screen. This marker is displayed when set to
ON at the MARKER page of the setting menu.
13 Super iris ON display
This indicates that the super iris is ON.
14 TCG display
This displays the time code generator value.
1) Iris value display
The iris value is displayed when using a lens with the iris value display function.
-40 -30 -25 -20 -15 -10 -5 0
E