Filter
Top Products
–85–
Recording
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures
outlined below.
Performing successive shooting after the tape has been run, the cassette has been ejected, or
when using a tape which has only been recorded part-way
1 Press the PLAY button while watching the viewfinder screen and play back the tape.
2 At the place where continuity between frames is to be provided, press the PLAY (or STOP)
button again to stop the tape.
3 Press the RET button on the lens. Preparations for frame-to-frame continuity are made
about two seconds later.
4 Press the VTR START button of the unit or the VTR button of the lens to start recording.
3
1,2
4