Filter
Top Products
10
Features
HD and SD format simultaneous operation possible
As a standard feature, the unit incorporates not only HD video signal
outputs but SD video signal outputs (SDI and analog composite).
BAR ID display
Characters can be displayed on the color bar signals so as to identify
the output source of the images, and then output.
Prompter
As a standard feature, the unit incorporates prompter input (analog
composite)
Support for memory cards
The upgrade software and unit’s setting data can be saved to a
memory card.
Accessories
Check the accessories.
After unpacking the product, dispose of the packaging material appropriately.
CD-ROM .................................................................................................. 1
Operating Instructions <Basics>
Operating Instructions <Operations and Settings>
Power cable
for AK-HCU200P / AK-HCU200PS ........................................................ 1
for AK-HCU200E / AK-HCU200ES ........................................................ 2
Precautions for use
Observe the following in addition to the information included in “Read this first!”.
Handle carefully
Do not drop the product or subject it to a strong impact.
Doing so may cause a failure or accident.
Avoid using the unit outdoors
Use the product in an ambient temperature of 0 °C to 40 °C
(32 °F to 104 °F)
Avoid using the product in a cold place where the temperature drops
below 0 °C (32 °F) or in a hot place where the temperature rises above
40 °C (104 °F) because an extremely low or high temperature will
adversely affect the internal parts.
Turn off the power before connecting or disconnecting
cables
Before connecting or disconnecting the cables, be sure to turn the power
off.
Avoid humidity and dust
Avoid using the product in a very humid or dusty place because a lot of
humidity and dust will cause damage to the internal parts.
Cleaning
Turn the power off and wipe the product with a dry cloth.
To remove stubborn dirt, dip a cloth into a diluted solution of kitchen
detergent (neutral detergent), wring it out well, and wipe the product
gently. Then, wipe the product with a cloth dampened with water. Finally,
wipe the product with a dry cloth.
Avoid using benzine, paint thinners and other volatile fluids.
If a chemical cleaning cloth is to be used, carefully read through
the precautions for its use.
Note
Optical fiber multi cable
When the optical fiber connectors of the optical fiber multi cable (sold
separately) become dirty, the optical signal transmission state will
deteriorate.
Use commercially available optical connector cleaner to clean the optical
end faces in accordance with the instructions.
Disposal of the unit
When the unit has reached the end of its service life and is to be
disposed of, ask a qualified contractor to dispose of the unit properly in
order to protect the environment.