Filter
Top Products
12
Make the connection with power supply to the unit turned off.
≥ Use AW-PS505P (option) as the AC adapter for control panel.
≥ Use a swivel stand, AW-PH300A, AW-PH500, AW-PH600, and an adapter suited for
the swivel stand.
≥ When no swivel stand is used, connect both of the motor-driven zoom lens iris control
cable and remote (zoom/focus) cable to the camera. (see page 13)
≥ When a swivel stand is used, connect the iris control cable to the camera, and the
remote (zoom/focus) cable to the swivel stand. (see the illustration below)
≥ For the connection system of each unit, refer to pages 14 to 16.
BREAKER
ZOOM/
FOCUS
SDI OUT
1
2
1
/
F
G/L IN Pb OUT Pr /SDI
OUT
Y/VIDEO
OUT
1394
CONTROL IN
IP/RP
DC12V
IN
CAMERA I/F
LENSE I/F
ND/EXT
SDI
IN
CSOP
How to Connect
To iris connector
Iris control
cable
Remote
(zoom/focus
control) cable
To lens interface
connector
≥ Connect the motor-driven zoom
lens iris control cable to the
camera, and the remote
(zoom/focus control) cable to the
swivel stand. If the motor-driven
zoom lens remote (zoom/focus
control) cable is connected to
the camera, the lens cannot be
controlled.