Filter
Top Products
8
F Gain select switch [GAIN]
Used to select the master gain of the camera. It changes in the order of 0dB )9dB
)18dB )S1 (Super gain 1) )S2 )3dB )0dB.
Note:
For super gain setting, check with the camera menu.
G Shutter select switch [SHUTTER OFF/STEP/SYNCHRO]
Used to select the electronic shutter of STEP and SYNCHRO set on the camera.
Note:
For electronic shutter setting, check with the camera menu.
H Indication change switch [CHECK]
Used to change the indication item.
I Indicator
It indicates the F value of iris.
J Master pedestal adjust volume [M-PED]
Used to adjust the pedestal setting of Y (luminance) signal of the camera.
K Lens iris auto/manual select switch [IRIS AUTO]
Used to select the lens iris adjusting method.
With the switch set to [AUTO], the lens is shifted to auto iris mode, and the iris is
automatically adjusted according to the amount of light coming into the lens.
With the switch set to [MANU], the lens iris can be moved in the range from close to
open by turning the lens iris adjust VR (volume) L.
When storing the lens iris in the preset position select switch 8 by using the preset
memory switch 7, set to [MANU] mode. It does not work in [AUTO] mode.
L Iris adjust volume [IRIS]
When the lens iris auto/manual select switch K is set at [MANU], the lens iris can be
moved in the range from close to open.
When the lens iris auto/manual select switch K is set at [MANU], press the preset
position select switch 8 to call the preset memory, then the lens iris position is set to
the preset memory position irrespective of the VR (volume) position. After that, when
the VR is turned, the lens iris returns to the value of VR.
Controls and their Functions