Filter
Top Products
13
_Lens connection in the case of no swivel stand
_How to mount the lens
≥ A lens of any maker’s can be used provided that it is a bayonet type (B4 mount) lens
of 2/3 inch standard.*
1 Turn the lens fixing ring knob counterclockwise and remove the lens mount cap.
2 Mount the lens and completely secure it by turning the lens fixing ring knob
clockwise.
3 Connect the iris control cable to the lens connector.
4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
*Note that some lenses are uncontrollable with respect to zoom and focus function.
How to Connect
BREAKER
ZOOM/
FOCUS
SDI OUT
1
2
1
/
F
720
PROGRESSIVE
Iris control cable (to
lens connector)
Remote (zoom/focus control)
cable
(Connect the cable to the swivel
stand when used.)
Lens fixing ring knob