Filter
Top Products
6
5 Menu operation switch [MENU]
Operation switch for camera menu.
Item selection or data change can be done by turning this switch. When this switch
pushed, the item and data are settled.
6 Menu ON switch [MENU ON]
Used to turn the camera menu ON/OFF.
7 Preset memory switch [MEMO]
Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris
position (when iris select switch K is at [MANU]). When using the preset memory, first
set the lens focus, zoom, and iris. Next, push this switch, then the switch is lighted.
Subsequently, push the desired preset position select switch 8. With the data stored in
the memory, the switch is lighted.
8 Preset position select switch [PRESET]
It calls the lens zoom, focus and iris settings previously stored in the memory, and
brings the lens into preset operation.
9 Speed change switch [SPEED]
High speed operation is obtained when the zoom operation lever : and the focus
adjust lever ; are operated while pressing this switch. The switch is lighted while being
pressed.
: Zoom operation lever [ZOOM TELE/WIDE]
Used for zoom operation of the lens. The zoom speed changes with the shifting angles
of the lever. With the zoom operation lever direction change switch T set at [NOR],
when the lever is shifted to [TELE], the zoom operates in a telescopic mode, and when
shifted to [WIDE], it operates in a wide angle mode. With the zoom operation lever
direction change switch T set to [REV], the zoom can be operated in the opposite
direction.
; Focus adjust lever [FOCUS FAR/NEAR]
Used to adjust the lens focus. The focus can be controlled in speed variable fashion by
regulating the shifting angle of this lever.
With the focus adjust direction change switch U set at [NOR], when this lever is shifted
to [FAR], the focus is adjusted to a far distance, and when shifted to [NEAR], the focus
is adjusted to a near distance. With the focus adjust direction change switch U set to
[REV], the focus can be adjusted in the opposite direction.
< Operation panel active switch [OPERATE]
This is an active switch for panel function. It can be operated when the switch is lighted.
It does not work when the switch is not lighted.
Controls and their Functions