Filter
Top Products
Indoor Pan/Tilt Head AW-PH400
16 (E)
ENGLISH
Installation (Be sure to ask your dealer to install the unit.)
$ Attaching the chain
When mounting the AW-E750 camera
1 Use the chain mounting screw (M4!8 mm with flat washer and spring washer) to attach one end of the chain to the pan/tilt
head’s arm.
2 Mount the mounting spacer on the top panel of the camera.
3 Use the chain mounting screw (M4!6 mm with flat washer and spring washer) to attach the other end of the chain to the
screw hole of the mounting spacer.
When mounting the AW-E350 or AW-E650 camera
1 Use the chain mounting screw (M4!8 mm with flat washer and spring washer) to attach one end of the chain to the pan/tilt
head’s arm.
2 Use the chain mounting screw (M4!6 mm with flat washer and spring washer) to attach the other end of the chain to the
screw hole of the top panel of the camera.
❈ Be absolutely sure to tighten up the mounting spacer and screws securely using a tool such as a screwdriver.
For a stand-alone installation For installation on the ceiling
≥ Camera: AW-E750 ≥ Camera: AW-E750
≥ Camera: AW-E650, AW-E350 ≥ Camera: AW-E650, AW-E350
M4!6 mm chain
mounting screw
with flat washer
and spring washer
M4!6 mm chain
mounting screw with flat
washer and spring washer
M4!8 mm chain
mounting screw
with flat washer
and spring washer
M4!8 mm chain
mounting screw with flat
washer and spring washer
Mounting
spacer
(supplied with
AW-E750)
Mounting spacer
(supplied with
AW-E750)
Chain
Arm