Panasonic AW-RP120G Security Camera User Manual


 
16
Parts and their functions (continued)
R/B PED dials [R/B PED]
Use these to individually adjust the pedestal of the R channel and
B channel (R PED and B PED) in order to set the desired black
balance.
Turned clockwise : Displays the setting values of the
R PED and B PED on the LCD panel
and changes the value in the plus (+)
direction.
Turned counterclockwise: Displays the setting values of the
R PED and B PED on the LCD panel
and changes the value in the minus (–)
direction.
Pressing these dials displays the current setting values on the LCD
panel (
3
).
Color adjustment ENABLE button [ENABLE]
Use this to enable or disable operation of the color adjustment
section.
Button indicator on: Operation of the color adjustment section is
enabled.
Button indicator off: Operation of the color adjustment section is
disabled.
Operating the DETAIL button (
K
), GAIN button (
), PED dial (
N
),
R/B GAIN dials (
), and R/B PED dials (
) switches the LCD
panel display to the corresponding value, but the original display is
redisplayed after approximately 3 seconds.
Indicator section
IRIS indicator [IRIS]
This indicates the position of the lens iris of the remote camera in
6 levels.
ZOOM indicator [ZOOM]
This indicates the position of the lens zoom of the remote camera in
6 levels.
FOCUS indicator [FOCUS]
This indicates the position of the lens focus of the remote camera in
6 levels.
Menu and memory selection section
Main mode selection buttons [MENU] [PMEM] [TMEM]
Use these to select the operation mode of the menu and memory
selection section.
Pressing a button turns on the button indicator of only that button and
switches to the corresponding operation mode.
MENU: Switches to the mode for selecting a menu (MENU mode).
“Basic operations for the menus” (page 20)
PMEM: Switches to the mode for recalling, storing, and deleting
preset memory (PMEM mode).
“Operating preset memory (PMEM)” in <Operations and
Settings> (page 12)
TMEM: Switches to the mode for recalling, storing, deleting, and
restoring tracing memory (TMEM mode).
“Operating tracing memory (TMEM)” in <Operations and
Settings> (page 18)
Memory mode selection buttons
[MEM STORE] [MEM DELETE] [RESTORE]
Use these to select any operation from store, delete, and restore
when PMEM or TMEM has been selected with the corresponding
main mode selection button (
).
Pressing a button when its indicator is off turns on the button indicator
of only that button and switches to the corresponding operation
mode.
Pressing a button when its indicator is on turns off all three button
indicators and switches to the mode for recalling memory (RECALL
mode).
MEM STORE : Switches to the mode for storing memory (STORE
mode).
MEM DELETE : Switches to the mode for deleting memory (DELETE
mode).
RESTORE : Switches to the mode for restoring tracing memory
(RESTORE mode).
For details on each mode, refer to the following.
“Operating preset memory (PMEM)” in <Operations and
Settings> (page 13)
“Operating tracing memory (TMEM)” in <Operations and
Settings> (pages 18 to 21)