Filter
Top Products
8
Features
IP connections and serial connections supported
IP connections
Up to 100 remote cameras *
1
can be controlled via a network hub
(switching hub).
The unit’s auto IP setting function can be used to automatically
assign and control the IP addresses of the remote cameras *
1
and
switcher *
2
.
*
1: Supported cameras: AW‑HE50, AW‑HE60, AW‑HE120, and AW‑HE2
*
2: Supported switcher: AW‑HS50
One remote camera can be simultaneously controlled from up to
5 units.
The setup software supplied with this unit can be used to set the IP
addresses of the remote cameras and switchers from a personal
computer via the unit.
Serial connections
Up to 5 remote cameras can be connected.
Easy to operate the remote cameras
The unit is equipped with dedicated levers, buttons, and dials for
performing pan, tilt, zoom, and focus operations. Furthermore,
there is a dedicated speed adjustment knob for each of them.
Camera angle adjustment can be performed quickly and reliably.
The unit is equipped with an AWB button and ABB button for
executing automatic adjustment of the white balance and black
balance. Furthermore, there are dedicated dials for adjusting the
pedestal and gain for each of the R channel and B channel.
Manual color adjustment is also easy.
The 1 to 50 number buttons and page buttons enable quick access
operations at sites where presets are used frequently.
Also, the speed at which a remote camera moves to a preset
position (PRESET SPEED) can be memorized for each preset
number of the unit. Thus, a remote camera can be operated at a
different speed depending on the preset number in accordance
with operation, enabling video playback at a variety of speeds.
Tracing memory is incorporated for recording a series of
operations.
It allows you to duplicate remote camera operations.
Supported remote cameras
HD integrated cameras
AW‑HE50, AW‑HE60, AW‑HE120, AW‑HE100, and AW‑HE2 *
3
*
3: Some operations of the AW‑HE2 differ from those of other HD integrated cameras.
For details, refer to “Operations of AW‑HE2” in <Operations and Settings> (page 51).
Pan‑tilt head and camera combinations
Systems including a combination of any of the following pan‑tilt heads and cameras can be controlled.
<Pan‑tilt heads>
AW‑PH360, AW‑PH405, AW‑PH650, and AW‑PH400 *
4
*
4: AW‑IF400 is required to connect AW‑PH400 to the unit.
<Cameras>
AW‑HE870, AW‑E860, AW‑E750, AW‑E650, AW‑E350, AK‑HC1500, and AK‑HC1800
Supported switcher
Compact live switcher
AW‑HS50