Filter
Top Products
Operating Instructions
116
8. After you confirm the settings and click [Next>], set E-mail notification and
click [Next>].
• If you select [Enable], the E-mail Notification When Triggered page is
displayed. Enter the settings referring to page 114–115.
9. Click [Save] after confirming the settings.
• The new settings are saved.
• When finished, "Success!" is displayed.
Note
• If you click [Save], all buffered images on the internal memory and SD memory
card are deleted.
10. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
• If you set a short interval when transferring images to a cell phone, many E-
mails will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.
• Motion Detection transfer stops operating until after the camera finishes all
transfers. For example, if the camera transfers 3 images per minute and 6
images in total, Motion Detection will follow the pattern below.
Setting Description
Disable • The camera does not send an E-mail notification when
buffering or transferring images.
Enable • The camera sends an E-mail notification (up to 3
destinations) when buffering or transferring images.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th
120 seconds
A Motion Detection signal is detected.