Filter
Top Products
Operating Instructions
156
7.4 Using Setup Program
The Setup Program can be used for the following purposes.
• Finding the IP address and port number of the camera connected to your
network.
• Setting up the camera automatically.
• Setting up the camera name manually. Also, setting up to a Static or a DHCP
setting.
• Disabling IPsec.
• Displaying the Setup page.
Finding the camera
1.
Insert the CD-ROM into the CD-ROM drive of your PC.
• If the Panasonic Network Camera Setup window does not appear, click
"setup.exe" on the CD-ROM.
2. Click [Camera Setup].
Displays version information about
this program.
Sets up the camera.
Displays the camera manuals.
If your PC does not have Adobe
®
Acrobat
®
Reader
®
, install it from
the Adobe Reader website.
Installs the Network Camera
Recorder Single Camera Version.
Closes the Setup Program.