Filter
Top Products
Operating Instructions
133
Setting Description
Image Resolution • Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality • Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] (default) offers standard quality.
[Favor Motion] optimizes for enhanced motion.
Refresh Interval • Select a refresh interval.
Motion (default), 3 s, 5 s, 10 s, 30 s, and 60 s
Time stamp setting • You can display a time stamp on the upper left side of
the image. Select from [Enable] or [Disable (default)].
Note
• If you enable this feature, the time is also stamped on
the buffered image.
• Set the AM/PM format and 24H format on the Date
and Time page.
Language • Select the initial language from English, Japanese,
French, German, Italian, Spanish, Simplified Chinese,
Russian or Korean. The selected language is displayed
as the initial language on the Top, Single Camera,
Multi-Camera and Buffered Image pages. If you select
English, Japanese or Simplified Chinese, all pages can
be changed. But if you select another language, the
Setup, Maintenance and Support pages are displayed
in English.
Banner Display When checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
• When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent and
continuous switching of the Single page burden the
PC that stores the image linked with the URL.
• If the image URL linked with an image stored in a PC
that requires an authentication is set, the
authentication window will be displayed when
displaying the Single Camera page.