Panasonic BB-HGW700A Security Camera User Manual


 
27[For assistance, please call: 1-800-272-7033]
Installation/Troubleshooting
Setup Pages Display
Problem Cause and Remedy
The Top Page or Setup
Page is not displayed.
Dialog boxes may not be displayed immediately due to the state
of the LAN.
Check that one of LAN1 - LAN4 or WIRELESS indicators are
shining green. Also, check if the LAN card or wireless LAN card
is on. If not, check that the LAN is connected.
Check that the power supply was turned on in the following order:
modem, this product, PC connected to the LAN side.
Check that an IP address has been assigned to the LAN side PC
by this product (see page 123 of Operating Instructions on the
CD-ROM). If it has not been assigned, check that the PC has
been set to Obtain IP Address Automatically, and restart the PC.
If this product's IP address has been modified (see page 74 of
Operating Instructions on the CD-ROM), enter the new IP
address in the web browser's address bar. (The default port
number is 8080.)
To access the setup page, it may be necessary to set the web
browser. (see page 122 of Operating Instructions on the CD-
ROM)
JavaScript is used on the setup page. If JavaScript is disabled in
the web browser settings, enable it and then access the setup
page.
1 Select Internet Explorer Tools, then Internet Options... in
Internet Explorer, and click the Security tab.
2 Click Custom Level... in Security level for this zone.
3 Enable "Active scripting" in Settings.