Filter
Top Products
-4-
o (S) (Set Button)
This button activates a selected item in the
CAM SETUP menu.
!0 Lens Holders
These holders bring the picture in an upright
position on the monitor screen.
!1 Dome Cover
This protects the camera head.
!2 Video Output Cable with BNC Connector
This connector is used to connect with the
VIDEO IN connector of the monitor.
!3 Power Cable with MOLEX Connector
This cable is for connecting the 24 V AC power
supply cable.
!4 Camera Fixing Bracket
This bracket holds the camera on the ceiling or
the wall.
Cautions:
1. Connect to 24 V AC (19.5 V-28 V) class 2
power supply only. Make sure to connect
the grounding lead to the GND terminal
when the power is supplied from a 24 V AC
power source.
2. To prevent fire or electric shock hazard, use
a UL listed wire VW-1, style 1007 cable for
the Input Terminal.
q Panning Table
This adjusts the panning angle of the camera.
w Camera Head
This adjusts the tilting angle of the camera.
e Focus Ring
This adjusts the focus.
r Zoom Ring
This adjusts the angle of view.
t (D) (Down Button)
This button moves the cursor downward. It
also selects items in the CAM SETUP menu.
y (R) (Right Button)
This button moves the cursor to the right. It
also selects the mode and adjusts some lev-
els.
u (L) (Left Button)
This button moves the cursor to the left. It also
selects the mode and adjusts some levels.
i (U) (Up Button)
This button moves the cursor upward. It also
selects items in the CAM SETUP menu.