Filter
Top Products
Others
109
VQT0Q09
Message Display
Confirmation messages or error messages
will be displayed on the screen in some
cases.
Major messages are described below as
examples.
[THIS MEMORY CARD IS PROTECTED]
Unlock [LOCK] of the Write-Protect switch
on the SD Memory Card. (P17)
[NO VALID IMAGE TO PLAY]
Play back after recording or after inserting
a card with a recorded picture.
[THIS PICTURE IS PROTECTED]
After canceling the protect setting, delete or
overwrite the picture.
[THIS PICTURE CANNOT BE
DELETED] /[SOME PICTURES CANNOT
BE DELETED]
The pictures not based on the DCF
standard cannot be deleted.
[CANNOT BE SET ON THIS PICTURE] /
[CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF
standard, the DPOF print cannot be set.
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at once with [MULTI
DELETE]. Once delete the selected
pictures and then repeat deleting multiple
pictures.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The format of the card cannot be
recognized by the camera. Format the card
again with the camera.
[PLEASE TURN CAMERA OFF AND
THEN ON AGAIN]
This message appears when the camera
does not operate properly. Turn the camera
off and on. If the message persists, contact
the dealer or your nearest servicenter.
[MEMORY CARD ERROR]
Failed access to the card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera off and remove the card.
Then insert the card and turn the camera
on again. Be sure that the camera is turned
off before removing or inserting the card to
avoid damage.
VQT0Q09ENG.book 109 ページ ２００５年１月２５日 火曜日 午後８時１７分