Filter
Top Products
Others
111
VQT0Q09
∫ Flash
1: Flash is not activated.
• Is the flash closed?
– Press the [ OPEN] button to open
the flash.
• In motion image mode [ ],
[SCENERY], [NIGHT SCENERY] or
[FIREWORKS] in scene mode (P63),
the flash setting is fixed to the Forced
OFF [ ] even if the flash is opened.
2: The flash is activated 2 times.
• When you select AUTO/Red-eye
reduction [ ], the first flash is
activated for red-eye prevention on the
subject (red-eye phenomenon) before
actually recording pictures. After the
first flash, the flash is activated again for
recording.
∫ Playback
1: Pictures being played are rotated and
displayed in an unexpected direction.
The camera has a function to
automatically rotate and display pictures
recorded by holding the camera
vertically.
(If you take pictures aiming the camera
up or down, the camera may recognize
that it is held vertically.)
• When [ROTATE DISP.] (P85) is set to
[OFF], you can display the pictures
without being rotated.
• You can rotate pictures with [ROTATE]
function (P85).
2: The picture is not played back.
• Is the mode dial set to playback [ ]?
• Is the card inserted?
• Is there a picture in the card?
3: The picture played back looks rough.
Noise appears on the picture.
• Is the ISO sensitivity is high or is the
shutter speed slow?
– Decrease the ISO sensitivity. (P73)
– Set [PICT.ADJ.] to [NATURAL]. (P80)
– Take pictures in bright places.
∫ TV, PC and printer
1: The picture does not appear on the
television.
• Is the camera connected to the TV
correctly?
• Set the TV input to external input mode.
2: When connecting to a PC, pictures
cannot be transferred.
• Is the camera connected to the PC
correctly?
• Is the camera recognized by the PC
correctly?
• Set [USB MODE] to [PC]. (P96)
3: The card is not recognized by the PC.
• Disconnect the USB connection cable
and then connect it again with the card
inserted into the camera.
4: The pictures cannot be printed with
the camera connected to printers.
• Is the printer supporting PictBridge?
– You cannot print pictures with printers
which do not support PictBridge
(P99).
• Set [USB MODE] to [PictBridge (PTP)].
(P96)
5: Both ends of the picture recorded by
setting the picture size to [HDTV]
(1920t1080 pixels) are cut out.
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
• When using the printer with a trimming
feature or other feature which cuts out
both edges of the pictures, cancel the
feature for printing. The feature
depends on the printer used.
• Refer to the operating instructions of
the printer for details.
VQT0Q09ENG.book 111 ページ ２００５年１月２５日 火曜日 午後８時１７分