Filter
Top Products
Recording pictures (basic)
31
VQT0Q09
∫ Program AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
• Remove the lens cap.
1 1 Turn the camera on.
2 Set the mode dial to program
AE mode [ ].
• The power indicator (green) lights.
When it blinks, the remaining battery
power is low. Insert a fully charged
battery.
2 Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
• A: Press the shutter button halfway to
focus.
• The focus indication 2 is lit and then
the aperture value 3 and the shutter
speed 4 are displayed.
3 Take a picture.
• B: Press the shutter button fully to take
the picture.
M
S
A
SCN
P
OFF ON
1/25F2.8
When the
subject is not
focused
When the
subject is
focused
Focus
indication
Blink (green) On (green)
AF area Turns from
white to red
Turns from
white to green
Sound Beeps 4 times Beeps 2 times
1/25F2.8
VQT0Q09ENG.book 31 ページ ２００５年１月２５日 火曜日 午後８時１７分