Filter
Top Products
124 VQT3G90 VQT3G90 125
Using with your PC (Continued)
Connect camera to computer
• Please make sure you use the supplied USB connection cable.
Use of cables other than the supplied USB connection cable may cause
malfunction.
Use cursor button on the camera to select [PC], and press
[MENU/SET]
A message may be displayed on screen if [USB Mode] (→46) is set to [PictBridge
(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to [PC].
Operate with your computer
■
To cancel connection
Click “Safely Remove Hardware” in the Windows System Tray
■
When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB Mode] (→46) is set to
[PictBridge (PTP)].
• Only picture output can be performed.
• It may not be possible to import if there are 1000 or more pictures on the card.
• AVCHD motion pictures cannot be read.
Getting Ready:
• Charge the battery
sufficiently. Or, connect the
AC adaptor (optional) and DC
coupler (optional).
• When importing pictures from
the built-in memory, remove
any memory cards.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
USB connection cable
(always use cable supplied)
Copying still pictures and motion pictures
∗
1
New folders are created in the following cases:
• When pictures are taken to folders containing files numbered 999.
• When using cards already containing the same folder number (for example,
pictures taken with other cameras, etc.).
• When recording after performing [No.Reset].
∗
2
Note that pictures cannot be uploaded to image-sharing websites if the files in the
AD_LUMIX folder are deleted.
• Do not delete or modify folders or data in the AVCHD folder using Windows
Explorer or other tools. The camera may be unable to play back the
motion pictures correctly if any of these files are deleted or modified.
For data management and editing of AVCHD motion pictures, use the
“PHOTOfunSTUDIO” software on the supplied CD-ROM.
You can save pictures to use on your computer by dragging and dropping folders and
files into separate folders on your computer.
■
Folder and file names on computer
●
Do not use any other USB connection cables except the supplied one.
●
Turn off power before inserting or removing memory cards.
●
When the battery begins to run out during communication, a warning beep sounds.
Cancel communication via your computer immediately. Use a sufficiently charged
battery or an AC adaptor (optional) and DC coupler (optional).
●
Setting the [USB Mode] to [PC] removes the need to make the setting each time the
camera is connected to the computer.
●
For more details, consult your computer operating manual.
DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
:
∗
1
999_PANA
MISC (DPOF files, Favorite)
AD_LUMIX (Folder for Web uploading)
∗
2
LUMIXUP.EXE (Uploading tool)
PRIVATE
AVCHD (Motion pictures in AVCHD)
●
Windows
Drives are displayed
in “My Computer” or
“Computer” folder.
●
Macintosh
Drives are displayed on
the desktop.
(Displayed as “LUMIX”,
“NO_NAME”, or
“Untitled”.)
JPG:
Still pictures
MOV:
Motion pictures
MPO:
3D still pictures