Filter
Top Products
Advanced (Recording pictures)
- 52 -
Item Description of settings
q: AUTO
The ash is automatically activated when the recording conditions
make it necessary.
@:
AUTO / Red-Eye
Reduction
The ash is automatically activated when the recording conditions
make it necessary.
It is activated once before the actual recording to reduce the red-
eye phenomenon (eyes of the subject appearing red in the picture)
and then activated again for the actual recording.
• Use this when you take pictures of people in low lighting
conditions.
t:
Forced Flash ON
`:
Forced ON /
Red-Eye
Reduction
The ash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under uorescent
light.
[:
Slow sync. /
Red-Eye
Reduction
If you take a picture with a dark background landscape, this feature
will slow the shutter speed when the ash is activated so that the
dark background landscape will become bright. Simultaneously it
reduces the red-eye phenomenon.
• Use this when you take pictures of people in front of a dark
background.
o:
Forced Flash
OFF
The ash is not activated in any recording conditions.
• Use this when you take pictures in places where the use of
the ash is not permitted.
¼
The ash is activated twice. The subject should not move until the second ash is
activated. Interval until the second ash depends on the brightness of the subject.
About the Digital Red-Eye Correction
When [Red-Eye Removal] (P85) has been set to [ON] and Red-Eye Reduction ([y],
[u], [i]) is selected, Digital Red-Eye Correction is performed whenever the
ash is used. The camera automatically detects red-eye and corrects the picture. (Only
available when [AF Mode] is set to [3] and Face Detection is active)
• Under certain circumstances, red-eye cannot be corrected.
• When it is set to [ON], [:] appears on the ash icon.