Filter
Top Products
Advanced (Recording pictures)
41
VQT1J82
subject is changed after focusing on the
subject, it may become difficult to focus on
it again.
•If the distance between the camera and
the subject is beyond the focus range of
the camera, the picture may not be
properly focused even if the focus
indication lights.
•Macro mode gives priority to a subject
close to the camera. Therefore, if the
distance between the camera and the
subject is more than 50 cm (1.64 feet) it
takes longer to focus on it in macro mode
than normal picture mode.
•The available flash range is about 60 cm
(1.97 feet) to 6.3 m (20.7 feet) (Wide).
(When the ISO sensitivity is set to
[AUTO].)
•We recommend setting the flash to
Forced OFF [ ] when you take pictures
at close range.
•When you take pictures at close range,
the resolution of the periphery of the
picture may decrease slightly. This is not a
malfunction.
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
•Refer to P42 to 49 and “About the
information ” for details about each
scene mode.
1 Press 3/4/2/1 to select the
scene mode.
•Press 4 at A to switch to the next
menu screen.
•You can switch menu screens from any
menu item by rotating the zoom lever.
2 Press [MENU/SET] to set.
•The menu screen is switched to the
recording screen in the selected scene
mode.
•To change the scene mode, press
[MENU/SET], then press 1, and repeat
steps
1and 2 above.
A
DMC-FX33_ENG.book 41 ページ ２００７年７月９日 月曜日 午後１２時５８分