Panasonic DMC-FX33 Digital Camera User Manual


 
Advanced (Playback)
85
VQT1J82
•DPOF is an abbreviation of “Digital Print
Order Format”. This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
•DPOF print setting is a convenient
function when printing pictures with a
printer that supports PictBridge. The date
printing setting on the printer may take
priority over the date printing setting on
the camera. Check the date printing
setting on the printer also. (P94)
•Some DPOF information set by other
equipment cannot be used. In such cases,
delete all of the DPOF information and
then set it again with this camera.
•If the file is not based on the DCF
standard, the DPOF print setting cannot
be set.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P74)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
Single setting
1 Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2 Press [MENU/SET] twice to close
the menu.
Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P83 to 85)
•If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
•The protect setting may not be effective
on other equipment.
•If you want to delete protected pictures,
cancel their protection.
Even if you protect pictures in the built-in
memory or a card, they will be deleted if the
built-in memory or the card is formatted.
Even if you do not protect pictures on an SD
Memory Card or an SDHC Memory Card,
they cannot be deleted when the card’s
Write-Protect switch
B
is set to [LOCK].
•The following functions cannot be used
with protected pictures.
–[ROTATE]
–[AUDIODUB.]
–[TITLE EDIT]
[PROTECT]
Preventing accidental erasure of
pictures
/SET
MENU
/SET
MENU
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
A
2
DMC-FX33_ENG.book 85 ページ 2007年7月9日 月曜日 午後12時58分