Filter
Top Products
Advanced (Playback)
90
VQT1J82
•DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P83)
•When copying clipboard pictures onto a
card, select [COPY] on the clipboard
playback menu. (P67)
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P74)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
•
When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
•If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
•Formatting irretrievably deletes all the
data including clipboard pictures and
protected pictures. Check the data
carefully before formatting.
•If the card has been formatted on a PC or
other equipment, format it on the camera
again.
•Use a battery with sufficient battery power
or the AC adaptor (DMW-AC5PP;
optional) when formatting.
•Do not turn the camera off during
formatting.
•
It may take longer to format the built-in
memory than the card. (Max. about 15 sec.)
•You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch A is set to [LOCK].
•If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
[FORMAT]
Initializing the built-in memory or a
card
/SET
MENU
/SET
MENU
2
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
DMC-FX33_ENG.book 90 ページ ２００７年７月９日 月曜日 午後１２時５８分