Filter
Top Products
Advanced (Recording pictures)
58
VQT1J82
About the white balance fine adjustment
•You can finely adjust the white balance
independently for each white balance
item.
•The white balance fine adjustment setting
is reflected in the picture when using the
flash.
•The white balance fine adjustment setting
is memorized even if the camera is turned
off.
•The white balance fine adjustment level in
[ ] returns to [0] when you reset the
white balance using [ ].
•You cannot finely adjust the white balance
when [COL.MODE] (P65) is set to [B/W],
[SEPIA], [COOL] or [WARM].
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
The camera will automatically set the
optimal ISO sensitivity and the shutter
speed to the movement of the subject and
the surrounding brightness.
• One of the following maximum ISO
sensitivity levels can be selected. The
higher the value set for the ISO sensitivity,
the more the jitter is reduced but the
greater the amount of picture noise.
•Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
•Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
•When you press the shutter button
halfway, [ ] A appears. When you
press the shutter button fully, the shutter
speed and the ISO sensitivity appear for a
while.
•When the flash is activated, the ISO
sensitivity is automatically increased to
maximum ISO sensitivity level.
•Refer to P36 for information about the
available flash range.
•Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided.
•The camera may not be able to detect the
movement of the subject in the following
cases.
–When the moving subject is small
–When the moving subject is at the edge
of the screen
–When the subject starts moving the
instant the shutter button is pressed fully
•To avoid picture noise, we recommend
decreasing maximum ISO sensitivity level
[INTELLIGENT ISO]
Automatically setting the optimal
ISO sensitivity and shutter speed
Item Settings
OFF Intelligent ISO does not work.
400 The ISO sensitivity
automatically increases up to
the set value according to the
movement and brightness of
the subject.
800
1250
/SET
MENU
ISOMAX
400
ISOMAX
800
ISOMAX
1250
1/125 ISO800
1/30 ISO200
A
DMC-FX33_ENG.book 58 ページ ２００７年７月９日 月曜日 午後１２時５８分