Filter
Top Products
Advanced (Recording pictures)
42
VQT1J82
∫ About the information
•If you press [DISPLAY] when selecting a
scene mode in step
1, explanations about
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
•Refer to P37 for information about the
shutter speed.
•The flash setting is memorized even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
•When you take a picture with a scene
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
•When [MENU/SET] is pressed and the
menu screen is displayed, [ ] is
selected in the [SCENE MODE] menu.
You can set each of the settings by
pressing 4 and selecting [REC] mode
menu [ ] or [SETUP] menu [ ].
•The following items cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
–[INTELLIGENT ISO]
–[SENSITIVITY]
–[COL.MODE]
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P41)
The person stands out from the
background and has a healthier
complexion.
∫ Technique for Portrait mode
To increase the effectiveness of this mode:
1 Rotate the zoom lever as far as
possible to Tele.
2 Move close to the subject to make this
mode more effective.
•This mode is only suitable when taking
pictures outdoors in the daytime.
•ISO sensitivity is fixed to [ISO100].
•The initial setting for [AF MODE] is [ ].
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P41)
This allows you to achieve a smoother
appearance of the skin than in
[PORTRAIT].
∫ Technique for Soft skin mode
To make this mode more effective:
1 Rotate the zoom lever as far as
possible to Tele.
2 Move close to the subject to make this
mode more effective.
•This mode is only suitable when taking
pictures outdoors in the daytime.
•If a part of the background etc. is a color
close to skin color, this part is also
smoothed.
•This mode may not be effective when
there is insufficient brightness.
•ISO sensitivity is fixed to [ISO100].
•The initial setting for [AF MODE] is [ ].
[PORTRAIT]
[SOFT SKIN]
/SET
MENU
/SET
MENU
DMC-FX33-BODY_mst.fm 42 ページ ２００７年７月１１日 水曜日 午後１１時５３分