Filter
Top Products
65
VQT1P09
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Using one of these modes, jitter during picture taking is detected, and the camera automatically
compensates the jitter, enabling jitter-free images to be taken.
Applicable modes: ñ·¿n
Note
•
The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
[STARRY SKY] in scene mode.
• It cannot be set to [OFF] in the Intelligent auto mode.
• In motion picture mode, [MODE2] cannot be set.
For details on [REC] mode menu settings, refer to P18.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also, you
can set it faster to reduce the blur of the subject.
Applicable modes: ·
[1/250], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
•
This should usually be set to [1/8] to take pictures. (When you select a minimum shutter speed
other than [1/8], [ ] appears on the screen.)
• Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
• Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in
red when the shutter button is pressed halfway.
[STABILIZER]
[OFF]
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
[MIN. SHTR SPEED]
Minimum shutter speed setting 1/250– 1–
Brightness
Darker Brighter
Jitter
Less More
DMC-FX35P_mst.book 65 ページ ２００８年１月１５日 火曜日 午前１０時３６分