Panasonic DMC-FX35 Digital Camera User Manual


 
VQT1P09
76
Advanced (Playback)
[PLAYBACK] mode: ¸
Using the [PLAYBACK] mode menu
You can use various functions in playback mode to rotate pictures, set protection for them etc.
With [TEXT STAMP], [RESIZE], [TRIMMING] or [ASPECT CONV.], a new edited picture is
created. A new picture cannot be created if there is no free space on the built-in memory or the
card so we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
You can display the calendar between January 2000 and December 2099.
If the date is not set in the camera, the recording date is set as January 1st, 2008.
If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in calendar playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] mode menu. (P18)
You can also rotate the zoom lever several times towards [L] (W) to display the
calendar screen. (P32)
Press 3/4/2/1 to select the date to be played
back.
3/4: Select the month
2/1: Select the date
If there were no pictures recorded during a month, the month is
not displayed.
Press [MENU/SET] to display the pictures that were
recorded on the selected date.
Press [] to return to the calendar screen.
Press 3/4/2/1 to select a picture and then press [MENU/SET].
The picture that was selected will appear.
CAL
1
2
3
4
DMC-FX35P_mst.book 76 ページ 2008年1月15日 火曜日 午前10時36分