Filter
Top Products
Preparation
14
VQT1J59
•The data on the built-in memory or the
card may be damaged or lost due to
electromagnetic waves, static electricity or
breakdown of the camera or the card. We
recommend storing important data on a
PC etc.
•Do not format the card on your PC or
other equipment. Format it on the camera
only to ensure proper operation. (P90)
•Keep the Memory Card out of reach of
children to prevent swallowing.
Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
A Mode dial
B [MENU/SET] button
Joystick
1 Press [MENU/SET].
2 Move 3/4/2/1 to select the date
and time.
A Time at the home area
B Time at the travel destination (P53)
•2/1: Select the desired item.
•3/4: Set the display order for the date
and time.
• : Cancel without setting the clock.
3 Press [MENU/SET] to set.
•Turn the camera off after setting the
clock. Then set the mode dial to a
recording mode to turn the camera on
and check whether or not the clock
setting is correct.
1 Press [MENU/SET].
2 Move 3/4 to select [CLOCK SET].
3 Move 1 and then perform steps
2 and
3 to set the clock.
4 Press [MENU/SET] to close the menu.
•You can also set the clock in the
[SETUP] menu. (P17)
•When a fully charged battery has been
inserted for more than 24 hours, charging
of the built-in battery for the clock is
completed so the clock setting will be
stored (in the camera) for at least
3 months even if the battery is removed.
(If you insert a battery that is not
sufficiently charged, the length of time that
the clock setting is stored may become
less.) However the clock setting is
canceled after this time. In this case, set
the clock again.
OFF
ON
Changing the clock setting
:
:
DMC-FX33_ENG.book 14 ページ ２００７年７月９日 月曜日 午後２時１６分