Filter
Top Products
Advanced (Recording pictures)
62
VQT1J59
∫ About [ ] or [ ]
•You can focus on the subject more quickly
than other AF modes.
•The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
•The AF area displayed is bigger than
usual when taking pictures in dark places
or when using the digital zoom.
•The camera is focusing on all the AF
areas when multiple AF areas (max.
5 areas) light at the same time.
The focus position is not predetermined. It
is set to a position automatically
determined by the camera at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to [ ], [ ] or [ ].
•If the AF mode is set to [ ] or [ ],
the AF area is not displayed until the
picture is brought into focus.
•Switch the AF mode to [ ] or [ ] if it
is difficult to focus using [ ].
•The AF mode cannot be set in
[FIREWORKS] in scene mode.
•It is not possible to set [ ] in the
following cases.
–In [NIGHT SCENERY], [FOOD],
[STARRY SKY], and [AERIAL PHOTO]
in scene mode.
–In motion picture mode [ ].
•The camera may detect the subjects other
than a person as the face. In this case,
switch the AF mode to any modes other
than [ ] and then take a picture.
Press [ ] to display the [REC] mode
menu and select the item to set. (P55)
∫ About the jitter/movement detection
demonstration screen
Press [DISPLAY] to display [JITTER,
SUBJ. MOVE DEMO] when the
[STABILIZER] screen is displayed.
(Pictures cannot be recorded when the
[JITTER, SUBJ. MOVE DEMO] screen
appears.)
Press [DISPLAY] again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
•It is also possible to display this screen
using the quick setting (P55).
•The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
•We recommend using a bright subject
with high contrast for the subject
movement demonstration.
•The jitter/movement detection
demonstration screen is an
approximation.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
/SET
MENU
A
B
DMC-FX33_ENG.book 62 ページ ２００７年７月９日 月曜日 午後２時１６分