Filter
Top Products
Advanced (Recording pictures)
40
VQT1J59
1 Move 3 [ ] until [EXPOSURE]
appears, compensate the
exposure with 2/1.
•You can compensate from [j2EV] to
[i2 EV] in steps of [1/3 EV].
•Select [0 EV] to return to the original
exposure.
2 Press [MENU/SET] to finish.
•You can also press the shutter
button halfway to finish.
•EV is an abbreviation of [Exposure Value].
It refers to the amount of light given to the
CCD by the aperture value and the shutter
speed.
•The exposure compensation value
appears on the lower left of the screen.
•The set exposure value is memorized
even if the camera is turned off.
•The compensation range of the exposure
will be limited depending on the
brightness of the subject.
•You cannot use the following functions.
–[STARRY SKY]
Taking Pictures using
Auto Bracket
In this mode, 3 pictures are automatically
recorded in the selected exposure
compensation range each time the shutter
button is pressed. You can select the
picture with the desired exposure from the
3 pictures with different exposures.
1 Move 3 [ ] several times until
[AUTO BRACKET] appears, set
the compensation range of the
exposure with 2/1.
•You can select [OFF] (0), [d1/3 EV],
[d2/3 EV] or [d1EV].
•When you do not use auto bracket,
select [OFF] (0).
2 Press [MENU/SET] to finish.
•You can also press the shutter
button halfway to finish.
•When setting auto bracket, the auto
bracket icon [ ] appears on the lower
left of the screen.
•When taking pictures using auto bracket
after setting the exposure compensation
range, the pictures taken are based on the
selected exposure compensation range.
When the exposure is compensated, the
exposure compensation value appears on
the lower left of the screen.
•The auto bracket setting is canceled if you
turn the camera off or power save mode is
activated.
DMC-FX33_ENG.book 40 ページ ２００７年７月９日 月曜日 午後２時１６分