Filter
Top Products
Advanced (Recording pictures)
38
VQT1J59
•¢2, 3: The shutter speed becomes a
maximum of 1 second in the following
cases.
–When the optical image stabilizer is set
to [OFF].
–When the camera has determined that
there is little jitter when the optical image
stabilizer is set to [MODE1] or [MODE2].
•In intelligent auto mode [ ], shutter
speed changes depending on the
identified scene.
•There will be differences in the above
shutter speeds in the following scene
modes.
–[NIGHT SCENERY]:
8 seconds to 1/2000th of a second
–[HI-SPEED BURST]:
1/8th of a second to 1/2000th of a
second
–[STARRY SKY]:
15 seconds, 30 seconds, 60 seconds
–[FIREWORKS]:
1/4th of a second, 2 seconds
•Do not look directly at the flash at
close range when it is activated.
•If you bring the flash too close to an
object, the object may be distorted or
discolored by the heat or lighting from
the flash.
•In economy mode, the LCD monitor
turns off and the status indicator lights
while the flash is charging. [This does
not happen when using the AC adaptor
(DMW-AC5PP; optional).]
If the remaining battery power is low,
the length of time that the LCD monitor
turns off to charge may become longer.
•When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
•When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
•The white balance may not be properly
adjusted if the flash level is insufficient for
the subject. (P56)
•When the shutter speed is fast, the flash
effect may not be sufficient.
•It may take time to charge the flash if you
repeat taking a picture. Take a picture
after the access indication disappears.
•The red-eye reduction effect differs
between people. Also, if the subject was
far away from the camera or was not
looking at the first flash, the effect may not
be evident.
•When the flash is activated, you can only
take 1 picture.
Taking Pictures with
the Self-timer
1 Move 2 [].
2 Move3/4 to select a mode.
•You can also move 2 [ ] to select.
3 Press [MENU/SET].
•You can also press the shutter
button halfway to finish.
•The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
4 Press the shutter button halfway
to focus and then press it fully to
take the picture.
A
B
DMC-FX33_ENG.book 38 ページ ２００７年７月９日 月曜日 午後２時１６分