Filter
Top Products
- 132 -
Recording
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1
Display the entry screen.
• You can display the entry screen via the following operations.
–[Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
–[Name] in [Face Recog.]
–[Location] in [Travel Date]
–[Title Edit]
3
Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET]
to end text input.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
•It is displayed in order of title, location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
2
Press 3/4/2/1 to select text and then press [MENU/
SET] to register.
• Move the cursor to [ ] and then press [MENU/SET] to switch text
between [A] (capitals), [a] (lower case), [1] (numbers) and [&]
(special characters).
• To enter the same character in a row, move the cursor by sliding the zoom lever to the [Z] (T)
side or rotating the rear dial to the right.
• The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
–[]]: Enter a blank
–[Delete]: Delete a character
–[ ]: Move the entry position cursor to the left
–[ ]: Move the entry position cursor to the right
• A maximum of 30 characters can be entered. (Maximum of 9 characters when setting names
in [Face Recog.])
¢ A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum of 6
characters when setting names in [Face Recog.]).