Filter
Top Products
153
VQT3A36
Connecting to other equipment
Connecting to other equipment
Enjoying 3D pictures
Attach the 3D interchangeable lens to the camera. (P20)
Bring the subject into the frame and record by pressing the shutter
button fully.
• Focusing is not required when recording 3D pictures.
•
Still pictures recorded with the 3D interchangeable lens attached are saved in MPO format (3D).
Note
•
You cannot record 3D pictures in vertical orientation.
• It is recommended to use a tripod or a flash to record steady pictures.
• When a distance to the subject is 0.6 m (1.97 feet) to approximately 1 m (3.28 feet), horizontal
disparity becomes too great, and you may not see the 3D effect at the edges of the image.
• Up to approx. 460 3D pictures can be recorded on a 2 GB card. (When the aspect ratio is set to
[X], and the quality is set to [ ].)
• Read the operating instructions of the 3D interchangeable lens for details.
∫ Functions that cannot be used during 3D recording
When recording with the 3D interchangeable lens (H-FT012; optional), the following
feature will be disabled:
(Recording functions)
•
Auto Focus/Manual Focus operation
• Aperture setting
• Zoom operation
• Recording motion pictures
¢1
• [DYNAMIC ART] in My Color Mode
• Monitor output (P158)
¢1 The motion picture button, Creative Motion Picture Mode and the [MOTION PICTURE] Mode
menu will be unavailable or unusable.
Taking 3D pictures
Attaching the 3D interchangeable lens
(H-FT012; optional) to the camera allows you
to take 3D pictures for extra impact.
To view 3D pictures, a television that
supports 3D is required.
3D picture
The image is an illustration.
To ensure that the 3D pictures can be safely viewed, pay attention to the
following points when recording.
•
Where possible, record with the unit in a horizontal state.
• The suggested minimum subject distance is 0.6 m (1.97 feet).
• Be careful not to shake the camera while in a vehicle or walking.
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 153 ページ ２０１０年１０月１９日 火曜日 午前１１時３分