59
VQT3B18
9 (After checking the operation description, touch [NEXT].)
Adjust the vertical alignment adjustment dial to align the vertical
position of the subject shown duplicated.
≥
Aim the unit at a subject from a distance of approximately 1.2 m (3.9 feet) to 2 m (6.6 feet),
and keep the image shown level by using the guidelines
A
.
≥ Difference in horizontal direction is characteristic of 3D video.
≥ It is recommended to stabilize the unit using the lens front cap as a platform when
performing the adjustment. (l 18)
≥ Touch [COMPLETE].
10
Touch [EXIT] to end the adjustment.
≥ After adjustment, a single screen appears.
≥ When re-attaching the 3D Conversion Lens or after
an impact etc., it is recommended that you perform
the adjustment again.
11
Press the recording start/stop button to start recording.
≥ When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom
operation is disabled.
≥ When recording in 3D, the image will appear with black frame around it. The black frame
will be recorded in the video.
7/8
7/8
To ensure that the 3D video can be safely viewed, pay attention to the following
points when recording.
≥ Where possible, record with the unit in a horizontal state.
≥ Do not get too close to the subject. (record from a distance of at least 1.2 m (3.9 feet).)
≥ When moving the unit as you record, move it slowly.
≥ Try to hold the unit as steady as possible when recording while riding in a vehicle or
walking.
3D
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HG
B appears.
3D
HDC-SDT750&TMT750-P-VQT3B18_mst.book 59 ページ 2010年8月20日 金曜日 午後3時53分