Filter
Top Products
44
VQT2W55
Please refer to page 91.
Set to [YES] for changing the menu settings back to the default condition.
≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (
l
95, 102)
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (l 131)
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
The amount of space left on the SD card can be checked.
(Only when the mode is at the position)
≥ Touch [EXIT] or press the MENU button to close the indication.
≥ The SD card requires some space to store information and manage system files, so the
actual usable space is slightly less than the indicated value. The usable space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated
value of the capacity appears to be smaller.
≥ Check the remaining recordable time for motion pictures in motion picture recording mode.
(l 30)
Perform the touch screen calibration if a different object to the one touched is selected.
1 Touch [CALIBRATION].
≥ Touch [ENTER].
2Touch the [_] that appears on the screen with the supplied stylus pen.
≥ Touch [_] in sequence (up left # down left # down right # up right # center).
3 Touch [ENTER].
≥ Calibration cannot be performed when the LCD monitor is turned 180o.
[TV ASPECT]
[16:9]/[4:3]
[INITIAL SET]
[FORMAT CARD]
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
[CARD STATUS]
[CALIBRATION]
HDCSDX1_eng.book 44 ページ ２０１０年６月１１日 金曜日 午前９時２７分