Filter
Top Products
91
VQT2W55
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
All information displayed
* This setting is only available in Recording
Mode.
≥ When the AV multi cable is connected to
this unit, the setup screen of the AV multi
destination is displayed on the screen of
this unit. Touch either [COMPONENT] or
[AV OUT] in accordance with the terminal
connecting to the TV. (l 92)
≥ If the HDMI mini cable and AV multi cable
are connected at the same time, output
will be prioritized in order of the HDMI mini
cable, AV multi cable.
≥ When viewing images recorded using
(640k480) on a [16:9] TV, the images may
be stretched horizontally. Adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
: [SETUP] # [TVASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
: [SETUP] # [EXT. DISPLAY] #
desired setting
0.3
M
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
HDCSDX1_eng.book 91 ページ ２０１０年６月１１日 金曜日 午前９時２７分