Filter
Top Products
VQT3P31 19
SETUP
INSTALLING THE CARD
Before using a newly purchased card or one that was used in another device,
be sure to format it with this camera (see pages 101 and 112 in the Operating
Instructions (PDF format)). If an unformatted card is used, the card itself may
become unusable.
<When removing the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
Card’s label side
2Insert the card
1 Open
3Close
iPush straight in
until you hear a
click.
4Close firmly
until you hear
a click.
1Push the middle part of the card.
2Pull the card
out straight.