Panasonic HX-DC10 Digital Camera User Manual


 
4 VQT3P31
IMPORTANT! PLEASE READ
k About the models covered by this instruction manual
iThis manual pertains to models HX-DC10 and HX-DC1.
iWhere passages refer to a specific model(s), the model number is
indicated.
k Be sure to take some test pictures beforehand
Before those important events, be sure to take some trial pictures to confirm
that the images and audio are being properly recorded.
k Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or
indirectly due to any type of problems that result in loss of recording or edited
content, and does not guarantee any content if recording or editing does not
work properly. Likewise, the above also applies in a case where any type of
repair is made to the unit (including any other non-built-in memory/HDD
related component).
k Handling of built-in memory
This unit is equipped with a built-in memory (HX-DC10: Approx. 80 MB, HX-
DC1: Approx. 80 MB). When using this component, pay attention to the
following points.
iThe status indicator (page 12) illuminates while the SD card or built-in
memory is being accessed (reading, recording, playback, deleting etc.). Do
not perform the following operations when the lamp illuminates. It may
damage the built-in memory or cause a malfunction in the unit.
h Turn the unit off (remove the battery)
h Eject the SD card from the camera.
h Insert or remove the USB cable
h Expose the unit to vibrations or shock
iFor disposing of or transferring this unit, please see page 112 in the
Operating Instructions (PDF format).
Back up data periodically.
The built-in memory is temporary storage. In order to avoid erasing data
due to static electricity, electromagnetic waves, breakage, and failures,
back up the data to a computer or DVD disc. (see page 123 in the
Operating Instructions (PDF format))