Panasonic HX-WA03 Camcorder User Manual


 
- 26 -
1 Connect the USB cable to the AC adaptor.
2 Plug the AC adaptor into the AC outlet.
3 Connect the USB cable to the unit.
Connecting the USB cable in the wrong direction may cause damage
to the USB/AV connector of the unit. If the connector has become
damaged, it may not operate correctly, including failure to recognize
the cable even if it has been connected.
The status indicator flashes red with a period of approximately 2 seconds
(approximately 1 second on, 1 second off), and charging begins.
It will turn off when the charging is completed.
Do not use any other AC adaptors except the supplied one.
Do not use any other USB cables except the supplied one.
We recommend using Panasonic batteries (l 27).
If you use other batteries, we cannot guarantee the quality of this
product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
For charging by connecting to another device, refer to page 204.
If the status indicator flashes at a particularly fast or slow rate, refer to
page 230.